To unlock the wheels on your Kitchenaid refrigerator, start by finding the small lever or button located at the bottom of each wheel. Then, press down firmly on the lever or button with your thumb to release it and allow you to move the refrigerator forward or backward.

With all four levers released, you can now tilt your refrigerator back slightly using one hand while pushing up from underneath with your other hand until all four wheels are off of the ground.

How to Unlock Wheels on Kitchenaid Refrigerator



Once lifted, use both hands to carefully push or pull the appliance into its desired location. To lock in place again simply press down on each individual wheel’s locking lever/button until they click into place.

  • Unplug the Refrigerator– First and foremost, unplug your refrigerator from its power source before beginning any repair work. This is an important safety measure that should never be overlooked as it will prevent electric shock or other hazards while you are working on the appliance.
  • Gently Pull Out The Refrigerator– With the refrigerator unplugged, gently pull it away from its wall so you can access the back panel of the unit. Depending on your model of Kitchenaid refrigerator, this may require two people to assist in moving it safely out of place.
  • Locate Wheels On The Back Panel– Once you have access to the back panel, locate all four wheels located near each corner at ground level on both sides of the fridge (usually two wheels per side). It’s likely they will be held in place by a bracket which requires removal first with a screwdriver or adjustable wrench depending on how secure and tight they are set in place by manufacturer standards.
  • Unlock Wheels For Movement– Once all screws and brackets have been removed to free up each wheel individually, lock them into place so they can move freely when needed for transportation or relocation purposes without coming loose again later down the line

How Do You Unlock a Kitchenaid Refrigerator?

If your KitchenAid refrigerator has become locked, then you’ll need to take the necessary steps to unlock it. To do this, start by locating the control lock button on either your refrigerator’s exterior or interior panel. If the button is pressed in and lit up, then you have successfully activated the control lock feature on your appliance.

Unlock a Kitchenaid Refrigerator

In order to unlock it, press and hold down that same button for three seconds until the light goes off. This will indicate that you have unlocked your fridge so you can continue using it as normal without any issues!

Is There a Lock on Refrigerator Wheels?

The answer to this question is yes, there are locks on refrigerator wheels. This feature has been designed for added security and convenience when moving refrigerators around the home or in a commercial setting. The lock helps keep the fridge in place and prevents it from being accidentally moved or knocked over by someone passing by.

It also provides an extra layer of protection against theft, as the lock can be used to secure the appliance even if it’s not plugged into a power source. Furthermore, some models come with adjustable wheel locks that make them easier to maneuver in tight spaces.

How Do You Lower the Wheels on a Refrigerator?

Lowering the wheels on a refrigerator is simple and easy to do. To lower the wheels, make sure that your refrigerator is unplugged from its power source. Next, locate the four adjustable feet at the bottom of your refrigerator.

There should be one foot in each corner of the unit. Using a wrench or pliers, gently turn each foot counterclockwise until they are loose enough to move by hand. Now you can adjust how low or high you want your fridge’s wheels to be using a flathead screwdriver or an Allen key (depending on what type of feet were used).

When finished adjusting them, use either tool again to tighten them securely so that they don’t shift while moving around your kitchen floor. Finally plug in your fridge and it will be ready for use!

How Do You Lower the Wheels on a Refrigerator

How Do You Reset the Control Board on a Kitchenaid Refrigerator?

Kitchenaid refrigerator control board reset on a KitchenAid refrigerator is not difficult, but it should be done with care.

First, unplug the power cord for at least 10 seconds from the wall outlet to reset any accumulated electrical surges in the system. Once you have disconnected power to the unit, locate and press down both buttons located inside of your unit—the ‘Control Lock’ button and also ‘Light’ button.

Hold both buttons down for five seconds; then release them and plug in power back into your refrigerator. This will reset all settings on your fridge’s control board to its factory default settings allowing you to make adjustments as needed or desired. Prior to re-adjusting any temperature setting or other related settings, let the appliance run for 2 hours after restarting before making changes so that it can reach optimal cooling temperatures once again.

It is important that these steps are followed carefully as incorrect wiring may cause damage to parts within your kitchen appliances such as compressors and fans which could lead to costly repairs if not handled correctly!

Conclusion

In conclusion, unlocking the wheels on a Kitchenaid refrigerator is a simple process that can be done in just a few easy steps.

All you need to do is locate and remove the screws that are holding the foot plate in place which may require some disassembly of other parts of your fridge first and then lift off the foot plate to access and unscrew the locking nut.

Once this has been completed, you should now be able to roll your fridge around as needed!

5/5 - (1 vote)

Leave a Reply

Your email address will not be published. Required fields are marked *