To reset the ice maker on your Whirlpool French Door Refrigerator, Locate the ice maker switch or button inside your refrigerator. It’s usually near the ice maker itself.

Turn off the ice maker by flipping the switch or pressing the button. Wait for about 30 seconds. Turn the ice maker back on by flipping the switch or pressing the button again.

Allow some time for the ice maker to reset and start producing ice. It might take a few hours for the first batch to be ready.

How to Reset Ice Maker on Whirlpool French Door Refrigerator

How to reset the ice maker on a whirlpool refrigerator?

To reset the ice maker on a Whirlpool refrigerator, locate the reset button on the ice maker. Press and hold the button for about 10 seconds until you hear a chime or see the indicator light change. This should initiate the reset process, and your ice maker should start working again.

How to reset my whirlpool ice maker?

To reset your Whirlpool ice maker, follow these steps:

  1. Locate the reset button on the control panel of the ice maker.
  2. Press and hold the reset button for approximately 10 seconds or until you hear a beep.
  3. Release the reset button and wait for a moment to allow the ice maker to complete the reset process.
  4. If there isn’t a specific reset button, you can alternatively unplug the refrigerator for about 30 seconds and then plug it back in to reset the ice maker.

Ice maker not responding to reset

If your ice maker is not responding to the reset button, there are a few things you can check to ensure everything is in order. Here are some possible causes:

  • Check that the ice maker is properly connected to the water supply and that the water supply valve is open.
  • Make sure the ice maker is not in the “Off” position. Look for the ice maker control arm, usually located on the side or front of the ice maker, and ensure it is in the “On” position.
  • Inspect the ice maker for any ice jams or obstructions. Clear any ice buildup or debris that may be hindering the ice-making process.

Error codes and their meanings

Whirlpool refrigerators often come equipped with error codes that can help diagnose and troubleshoot specific issues with the ice maker. Here are some common error codes you may encounter:

Error CodeMeaning
E1Ice maker sensor fault. This could indicate a problem with the ice maker sensor or the control board.
E2Ice maker motor fault. This error code suggests an issue with the ice maker motor or related components.
E3Ice maker thermistor fault. This error code indicates a problem with the ice maker’s temperature sensor.
Whirlpool French Door Refrigerator Error codes

Resetting the refrigerator if the ice maker reset doesn’t work

If the ice maker reset does not resolve the issue with your ice maker, you can try resetting the refrigerator as a whole. Here’s how:

  1. Locate the refrigerator’s power cord and unplug it from the electrical outlet.
  2. Leave the refrigerator unplugged for at least 30 seconds to allow the internal components to reset.
  3. Plug the refrigerator back into the electrical outlet and wait for it to power on.
  4. Once the refrigerator is powered on, check if the ice maker is now functioning properly.

If these steps do not solve the problem, it is recommended to contact a professional technician or Whirlpool customer support for further assistance.

My whirlpool refrigerator is not making ice


If your Whirlpool refrigerator is not making ice, there are several possible reasons for this issue. Here are some troubleshooting steps you can follow:

  1. Check the Ice Maker Switch:
    • Make sure the ice maker switch is in the “On” position. It’s usually located on the side or front of the ice maker.
  2. Water Supply:
    • Ensure that the refrigerator is connected to a water supply and that the water supply valve is open.
  3. Water Filter:
    • If your refrigerator has a water filter, check if it’s clogged or needs replacement. A clogged filter can restrict water flow to the ice maker.
  4. Ice Maker Fill Tube:
    • Inspect the ice maker fill tube for any blockages. This tube supplies water to the ice maker. Clear any obstructions if present.
  5. Temperature Settings:
    • Check the freezer and refrigerator temperatures. The freezer should be set between 0 and 5 degrees Fahrenheit (-15 °C) for the ice maker to work properly.
  6. Check for Ice Obstructions:
    • Look for any ice cubes that may be stuck in the ice maker mechanism. Clear them if you find any.
  7. Reset the Ice Maker:
    • Some models have a reset button on the ice maker. Press and hold it for a few seconds to reset the ice maker.
  8. Inspect the Water Inlet Valve:
    • The water inlet valve controls the flow of water to the ice maker. If it’s faulty, the ice maker may not receive water. You may need to replace the water inlet valve if it’s not functioning correctly.
  9. Inspect the Ice Maker Assembly:
    • If none of the above steps resolve the issue, you may need to inspect the entire ice maker assembly for any visible signs of damage or malfunction.

How to turn off ice maker on whirlpool side by side refrigerator?

To turn off the ice maker on a Whirlpool side-by-side refrigerator, locate the switch or lever usually located on the front of the ice maker assembly. Simply toggle the switch to the “Off” position or lift the lever up, depending on the model. This will stop the ice maker from producing ice.

Is there a reset button on a whirlpool ice maker?

Yes, most Whirlpool ice makers have a reset button. It is typically located at the bottom of the ice maker unit, but in some models, it may be located at the bottom of the ice tray itself. The reset button is typically a small, recessed button that you will need to press down and hold for a few seconds until you hear a beep.

Here are the steps on how to reset a Whirlpool ice maker:

  1. Locate the reset button.
  2. Press the reset button down and hold it for a few seconds until you hear a beep.
  3. Release the reset button.

If you are still having trouble with your Whirlpool ice maker after resetting it, you may need to consult your owner’s manual for further troubleshooting instructions.

Here are some additional tips for troubleshooting a Whirlpool ice maker:

  • Make sure that the ice maker is turned on.
  • Make sure that there is enough water in the refrigerator’s water reservoir.
  • Make sure that the water supply valve is turned on.
  • Check for any ice clogs or blockages in the ice maker mechanism.
  • If you have a water filter in your refrigerator, make sure that it is not clogged.

If you have tried all of the above troubleshooting tips and your Whirlpool ice maker is still not working, you may need to contact Whirlpool customer support for further assistance.

Is there a reset button on a whirlpool ice maker

Where Is Reset Button On Whirlpool Ice Maker?

The reset button on a Whirlpool ice maker is typically located on the control panel. Look for a small button labeled “Reset” or a small hole where the button would be inserted. Press and hold the reset button for a few seconds to reset the ice maker.

Why Is My Whirlpool French Door Fridge Not Making Ice?

If your Whirlpool French door fridge is not making ice, check if the ice maker is turned on. Make sure the water supply is connected and the water line is not frozen. Clean the ice maker to remove any blockages. If the issue persists, contact customer support for further assistance.

How Do You Turn On The Ice Maker On A Whirlpool French Door Refrigerator?

To turn on the ice maker on a Whirlpool French door refrigerator, locate the control panel inside the refrigerator. Press the ice maker button until it is illuminated. Your ice maker should now be activated and ready to produce ice.

Why Is My Whirlpool Ice Dispenser Not Working?

The Whirlpool ice dispenser may not be working due to issues with the water supply, ice maker assembly, or dispenser motor. Check the water supply, make sure the ice maker is turned on, and inspect the dispenser motor for any problems.

Conclusion

Resetting the ice maker on your Whirlpool French Door Refrigerator is a simple process that ensures a steady supply of ice for your drinks. By following the step-by-step instructions provided in this blog post, you can quickly and easily reset your ice maker, saving you time and frustration.

With this knowledge, you can confidently solve any issues that may arise with your ice maker and enjoy the convenience it provides. So, don’t let a malfunctioning ice maker spoil your day – reset it and keep the ice flowing!

Why is my whirlpool refrigerator not making ice but water works?

The issue with your Whirlpool refrigerator not making ice while the water dispenser is working could be due to various reasons.

First, check if the ice maker is turned on. If it’s on and still not producing ice, inspect the water supply line for any blockages.

Additionally, make sure the freezer temperature is set to the recommended level for ice production.

5/5 - (2 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *